Tenax Ager Colour Enhancing Sealer 1 Liter

Ager Stone Enhancing Sealer

Tenax Ager is an enhancer and sealer that revitalizes and enhances the color of natural stone surfaces. Use Ager to give the stone a deep, rich appearance and protect the pores from absorbing potentially discoloring liquids that could stain the surface. Ager is a solvent based product that has two main functions. First, it protects all sorts of natural stone materials from absorbing liquids that could mar the appearance of the stone. Second, Ager enhances the natural color and grain of the material to which it is applied. Additionally, Tenax Ager helps protect natural stone against scratches.

Tenax Ager can be used with all sorts of natural stone surfaces including the following materials:

• Marble
• Granite
• Limestone
• Sandstone
• Quartzite
• Travertine
• Agglomerate
• Rosso Verona

WARNING: Tenax Ager does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomatoes, citrus, coffee, etc. will etch the surface by creating a chemical reaction with calcium carbonate present in marbles. For etching problems use Tenax TeEtch

Features

• Suitable for use indoor or outdoor
• Resistant to UV Rays
• Doesn’t Turn Yellow
• Resists Water-based Stains
• Oil-based Stain Resistance
• Enhances the Natural Colors of the Stone
• Helps Enhance Graffiti Protection
• 215 – 323 Sq Ft Coverage Per Liter (depending on material porosity)

Instructions

1. Before treating a surface for the first time, test the product on an inconspicuous part of the stone or on a sample to preview the affects.
2. Clean the stone surface thoroughly and then dry it completely to remove any dust, dirt, or other matter that will affect the performance of the sealer.
3. Using a paintbrush, cloth, fleece, or sponge applicator, apply Tenax Ager undiluted to the natural stone surface.
4. Allow the stone to naturally absorb the Ager evenly. Within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth or sponge.
5. Avoid applying Ager in direct sunlight.
6. Wait 24 hours after treatment for finished surface.
7. If using on a floor surface, wait 4-6 hours before walking on the treated area.